Principle of inertia – centre of inertia of a spinning puck on an air table

PhysicsForces & DynamicsAges 15–16Virtual lab

Use with my class

A puck on an air table carries a mark G at its centre and a mark M near its edge. Launch it with a spin and a spark recorder marks both every 20, 40 or 60 ms: on a level table only the centre of inertia G moves in a straight line at constant speed, while M loops round it. Pick any frame to measure the distance between the frames on either side, work out the speeds v = P(i−1)P(i+1)/(2τ) and record them, then tilt the table and watch G speed up down the slope.

Lesson: Principle of inertia (Newton's first law): centre of inertia, chronophotograph, instantaneous speed

What it shows

A body on which the forces balance keeps a constant velocity: this is the principle of inertia, Newton's first law. For a body that also spins, it holds for one special point, the centre of inertia (centre of mass) G. On an air table the air cushion's reaction balances the weight, so G moves in a straight line at constant speed while a mark M on the edge turns round it and traces a wavy or looping curve. On a tilted table the forces no longer balance and G speeds up at g·sin β. The model ignores friction and air resistance.

How to use

Choose Level or Tilted table, set Launch speed of G, Launch direction, Spin ω and Frame interval τ, then press Launch to watch the recording build up. Pick a frame with Frame i or by tapping a dot: the sheet shows G(i−1)G(i+1) and M(i−1)M(i+1), and the readout gives the speeds. Press Record frame to add the positions and speeds to the table and the speed–time graph.

Parameters you can change

  • Table Level, Tilted
  • Tilt angle β 1–10 °
  • Launch speed of G 0.05–0.5 m/s
  • Launch direction -45–45 °
  • Spin ω -20–20 rad/s
  • Frame interval τ 20–60 ms

Questions to explore

  1. Why does the centre mark G move in a straight line while the edge mark M loops round it?
  2. On a level table, how do the speeds of G at different frames compare, and what does that show?
  3. How does the speed of G change with time on a tilted table, and how can you find its acceleration?