Ultrasound imaging – acoustic impedance, A-scan and B-scan, cleaning and endoscopes
PhysicsOscillations & WavesAges 17–18Virtual lab
How do you mainly use this simulation?
Use it with your class: students open it from a link or a QR code, with no account needed.
Send an ultrasound pulse into layers of tissue and watch the echoes come back. The fraction reflected at each boundary follows from the acoustic impedances Z = ρc of the two materials, R = ((Z₂ − Z₁)/(Z₂ + Z₁))², so an air gap reflects almost everything and a coupling gel is needed. Echo times build an A-scan, with depth d = ct/2 and c = 1540 m/s, and a sweep of the probe builds a B-scan image of a rib and a cyst. Two more screens show ultrasonic cleaning by cavitation and the fibre bundles of an endoscope.
Lesson: Ultrasound in medicine: acoustic impedance, reflection at boundaries, coupling gel, A-scan and B-scan; ultrasonic cleaning; endoscopes and total internal reflection
What it shows
Ultrasound for imaging is sound of a few megahertz, far above hearing. At a boundary between two materials, the fraction of the intensity reflected depends only on their acoustic impedances Z = ρc. Soft tissues have similar impedances, so each boundary reflects a few per cent and the rest travels on; air and bone differ greatly, which is why gel must fill the gap between probe and skin. The scanner times each echo and plots it at depth d = ct/2. Higher frequencies give sharper images but are absorbed sooner. Ultrasound also cleans objects by cavitation, while endoscopes guide light in glass fibres.
How to use
On A-scan, choose gel or an air gap, the frequency and the layer thicknesses, press Send pulse, then Record echoes. On B-scan, press Sweep or move the probe, and press Record line where the image shows something. On Cleaning, set the frequency and power and press Clean. On Endoscope, change the angle of the ray and the refractive indices, and press Record ray.
Parameters you can change
- Screen A-scan, B-scan, Cleaning, Endoscope
- Between probe and skin Gel, Air gap
- Frequency 2–10 MHz
- Fat layer 5–30 mm
- Muscle layer 10–40 mm
- Probe position 0–80 mm
- Cleaner frequency 20–80 kHz
- Cleaner power 0–100 %
- Angle of the ray in air 0–80 °
- Fibre bundle Coherent, Incoherent
- Refractive index of the core 1.45–1.75
- Refractive index of the cladding 1.4–1.7
Questions to explore
- Why does a layer of air between the probe and the skin stop the image?
- Why is the echo from the muscle–bone boundary much stronger than the echo from the fat–muscle boundary?
- Why does a higher frequency give a sharper image but reach less deep?