Column, gas and HPLC chromatography – retention time, Rf and calibration
ChemistryOrganic ChemistryAges 16–17Virtual lab
How do you mainly use this simulation?
Use it with your class: students open it from a link or a QR code, with no account needed.
Three methods that go beyond TLC: a silica gel column that separates leaf pigments into colored fractions, a gas chromatograph with an oven and two stationary phases, and an HPLC with a methanol–water eluent. Identify the compounds in a sample by comparing retention times with standards, and find the caffeine in a drink from a peak-area calibration line. Fractions, peaks and calibration points go into tables.
Lesson: Chromatography – column, GC and HPLC
What it shows
Chromatography separates a mixture because each substance shares its time between a stationary phase and a moving mobile phase. In the column, leaf pigments move down silica gel at Rf times the speed of the eluent, as on a TLC plate, and leave in separate colored fractions. In gas chromatography a hotter oven shortens retention times, and the polarity of the stationary phase can change the order of the peaks. In reversed-phase HPLC more methanol makes every compound come off sooner. Retention times identify the compounds; peak areas, read against a calibration line, give their concentrations. The values are illustrative.
How to use
Column tab: choose the Eluent and press Open tap; you can change the eluent while it runs, and tap a tube to spot it on the TLC plate. GC and HPLC tabs: choose a Sample and the conditions, press Inject (or Skip to end), then tap the top of each peak to record its retention time and area. Run the standards under the same conditions as the samples. For caffeine, measure the five calibration standards, then the energy drink.
Parameters you can change
- View Column, Gas chromatography, HPLC
- Eluent Hexane, Ethyl acetate, Ethanol
- GC sample Methanol standard, Ethanol standard, Propan-2-ol standard, Propan-1-ol standard, Butan-1-ol standard, Sample A (hand gel, diluted), Sample B (fermentation, diluted)
- Oven temperature 40–150 °C
- Stationary phase Polar (PEG wax), Non-polar (PDMS)
- HPLC sample Theobromine standard, Theophylline standard, Caffeine standard, Benzoic acid standard, Caffeine 25 mg/L, Caffeine 50 mg/L, Caffeine 100 mg/L, Caffeine 150 mg/L, Caffeine 200 mg/L, Tea (diluted), Energy drink (diluted)
- Methanol in eluent 20–70 %
Questions to explore
- Why does the orange-yellow band of carotene leave the column before the green chlorophyll bands?
- How do the retention times of the alcohols change when the oven gets hotter, and why do the peaks start to overlap?
- Why must the standards be run on the same column and under the same conditions as the unknown sample?